- 4 in 1 dual usb car charger digital monitor lcd display wireless voltage tester volt current temperature meter
1 Pc 48-72V 1500W 4 In E-Bicyle Scooter Brushless Intelligent Dual Modes Controller
Brand Name: OOTDTY
Motor Type: Stepper Motor
Model Number: 1AA700790%
Unit Type: piece
Package Weight: 0.78kg (1.72lb.)
Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
100% brand new and high quality
The product is brushless dual-mode smart measure battery voltage, motor phase.
Powerful start, climbing power large and small motor noise.
When the battery voltage become lower, the current will also become lower to keep normal running.
It not only protect the battery and extend the battery life, but also increase the running distance.
Automatically recognize the motor phase angle and motor right spin direction. It can be conducted by the Self-Study wires.
Start silently, balanced and constant power out-put, Mature Production technical of Controller and authentic quality.
Over-heat protection, the controller will cut the power when the temperature is overtop, and restart if the temperature is normal.
Intelligent management of battery system, the controller will reasonable control the battery discharge, low-voltage protection function to extend the battery life.
When overload of the bike to make the motor stall more than 2 seconds, the controller will cut off the current out-put to protect the motor and battery.
Double-Mode, controller can check the motor hall sensor condition automatically.
If the motor sensors are broken, controller will operate to None-Hall mode.
When the motor phase is failure, controller will protect it, avoid motor burned, and protect the battery at the same time.
Connect the learning switch.
Connect the motor wire(phase A, phase B, phase C). Then connect the hall plug.
Connect the power and the twist grip plug.
Twist the grip plug. If the motor rotate reversely, cut off the learning switch, then connect the learning switch again. If the motor doesn't rotate, check the wiring. If the motor forward rotation, go to step 5.
Keep the motor working at least 1 minute, cut off the learning switch.
Twist the grip plug. If the motor works normal, connect other wire. If not, adjust the twist grip wire, until the motor works normally.
Color: As Pictures Shown
Throttle : 1.1-4.2V
Undervoltage protection : 41.5±0.5V
Quantity: 1 Pc
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Motor Speed Controller only, other accessories in the picture are not included.
1 x Motor Speed Controller
4 in 1 PS4 Pro Vertical Stand with Dual Cooling Fans,Dual Controller Charging Station and 3 Extra HUB Ports For Console
4 in 1 Stand Holder with Charger Charging Station for PS4 PlayStation PS VR Camera/Headset/ Dual Vibration Move Controller
Two-in-one audio Adapter Dual 3.5 MM Headphone Plug Audio Cables Splitter Microphone+Stereo plug 2 in 1 4 pole Headset Connector
4 in 1 Car Digital Voltmeter Dual 7.3A USB Port Power Socket four Hole aluminum Panel with wiring kits
Youbina 2 in 1 dual Qi Wireless Charger Charging Dock Holder For Apple Watch 4 3 iPhone X 8 xs max xr
New Dual USB Ports Car Charger + LED Voltmeter 12-24V Power Socket On-Off Switch 4 in 1 Marine Boat Panel
4 in 1 Universal Auto Switches 6-24V Red LED Dual USB Port Car Charger + Voltmeter 12V Power Socket with On-Off Switch
For PlayStation 4 Slim Console PS4 2 in 1 Vertical Stand w/ Cooling Fan Charger Charging Station Dual Ports USB
USB 3.0 to 2-Port Hub+SD & MicroSD/TF Dual Card Reader + 10/100/1000 Gigabit Ethernet Adapter,4 in 1 Multi Funtion Hub for P
Dual USB 4 In 1 Car Charger DC5V 3.1A With Voltage/Temperature/Current Meter Tester Adapter Digital Display
Universal Double Dual 2 in 1 Nano Micro SIM Card Cutter Cutting Fit For iPhone 4 4s 5 6 Nokia Samsung Cell Phone